On this page6
  1. Is an upgrade right for you?
  2. Test first, then order in bulk
  3. What to expect
  4. Send these details for your bulk quotation
  5. How a bulk order works
  6. Where carbide-inlaid blades are used

Your steel blades wear out too fast? Try a carbide-inlaid blade of the same size. TFI Co. has made steel blades since 1965. We make blades with a tungsten carbide (TC) strip in a steel body, to the size and holes of the blade you use now. Factories and distributors order them in batches of 50 to 5,000+ pcs.

What changes
The cutting edge: tungsten carbide instead of steel
What stays the same
Size, holes and fit in your machine
Made
To your drawing, or to the sizes of your present blade
Start
A trial batch in the 50–199 pcs band
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
What changes
The cutting edge: tungsten carbide instead of steel
What stays the same
Size, holes and fit in your machine
Made
To your drawing, or to the sizes of your present blade
Start
A trial batch in the 50–199 pcs band
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Is an upgrade right for you?

Answer these three questions:

  • Do you change or regrind blades often?

    If a change stops the line, every extra hour of blade life saves production time.

  • Is the material abrasive?

    Paper, board, glued wood, fibre and filled plastics wear steel edges fast. Carbide resists this wear.

  • Does the blade take hard shocks?

    If yes, carbide may chip. A tough steel blade can be the better choice.

  • Do you change or regrind blades often?

    If a change stops the line, every extra hour of blade life saves production time.

  • Is the material abrasive?

    Paper, board, glued wood, fibre and filled plastics wear steel edges fast. Carbide resists this wear.

  • Does the blade take hard shocks?

    If yes, carbide may chip. A tough steel blade can be the better choice.

If you answer yes, yes and no, a carbide-inlaid blade is worth testing.

Test first, then order in bulk

  1. Trial batch

    order the smallest band, 50–199 pcs, of the same size as your steel blade.

  2. Measure

    run the TC blades on the same machine and material. Count the hours or cuts between regrinds.

  3. Compare

    with your steel blades: blade life, number of stops and grinding cost.

  4. Order the next band

    if the numbers are better. We keep your drawing, so the bulk batch matches the trial.

  1. Trial batch

    order the smallest band, 50–199 pcs, of the same size as your steel blade.

  2. Measure

    run the TC blades on the same machine and material. Count the hours or cuts between regrinds.

  3. Compare

    with your steel blades: blade life, number of stops and grinding cost.

  4. Order the next band

    if the numbers are better. We keep your drawing, so the bulk batch matches the trial.

What to expect

The carbide edge keeps its sharpness longer than steel on abrasive material. In return, it needs more care: regrind it with a diamond wheel, and avoid knocks on the edge. How much longer it lasts depends on your machine and material, so we do not promise a number. The trial batch shows it on your own line.

Send these details for your bulk quotation

  • Size of your present blade (mm), and the hole pattern

  • Machine make and model

  • The material you cut

  • How long your steel blade lasts today, and how it fails

  • Quantity band for the trial and for later orders

  • Size of your present blade (mm), and the hole pattern

  • Machine make and model

  • The material you cut

  • How long your steel blade lasts today, and how it fails

  • Quantity band for the trial and for later orders

No drawing? A phone photo of your present blade, with a tape measure beside it, is enough to start.

How a bulk order works

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the size, holes and the right carbide grade, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the size, holes and the right carbide grade, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so the next batch is the same part.

Where carbide-inlaid blades are used

  • Paper cutters, trimmers and print finishing

  • Wood planing, chipping and panel lines

  • Paper and plastic recycling

  • Any line where steel blades wear out quickly

  • Paper cutters, trimmers and print finishing

  • Wood planing, chipping and panel lines

  • Paper and plastic recycling

  • Any line where steel blades wear out quickly

Will a carbide-inlaid blade fit my machine?

We make it to the same size and holes as your present blade, so it fits the same place.

How much longer will it last?

It depends on the machine and the material. We do not promise a number; a trial batch of 50–199 pcs shows the result on your own line.

How is the price set?

The price depends on the size, the steel and the quantity band. You receive a written quotation before you order.

Section
Shear and Straight Knives
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote