On this page6
  1. Fixed and moving knife: a working pair
  2. Example: knife set for the SCHNELL CGS 450
  3. How to choose the right knife
  4. Send these details for your bulk quotation
  5. How a bulk order works
  6. Where rebar knives are used

Rebar cutting knives for rebar shears and cut-and-bend lines. TFI Co. has made steel blades since 1965. We make fixed and moving knives for Italian, European and American rebar machines, and we have exported rebar knives to Egypt. We supply rebar yards, machine dealers and distributors who order 50 to 5,000+ pcs.

Knife types
Fixed (bottom) and moving (top) knives, sold as single knives or sets
Machines
Rebar shears and cut-to-length lines, for example SCHNELL CGS 450 and Oscam T5 / T530
Steel
Shock-resistant alloy tool steel, heat-treated for impact
Made
To your drawing, to a sample, or from your machine model
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Knife types
Fixed (bottom) and moving (top) knives, sold as single knives or sets
Machines
Rebar shears and cut-to-length lines, for example SCHNELL CGS 450 and Oscam T5 / T530
Steel
Shock-resistant alloy tool steel, heat-treated for impact
Made
To your drawing, to a sample, or from your machine model
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Fixed and moving knife: a working pair

A rebar shear cuts with two knives. The fixed knife sits in the machine bed and holds the bar. The moving knife is driven by the ram and gives the cutting impact. The moving knife takes repeated shock, so the steel must be tough, not only hard. A knife that is too hard can crack; a knife that is too soft loses its edge quickly. Many buyers replace both knives together, so the clearance between them stays correct.

Example: knife set for the SCHNELL CGS 450

TFI Co. makes both knives of this set. They have the same size and work as a pair:

  • Size

    Fixed knife
    55 × 98 × 450 mm
    Moving knife
    55 × 98 × 450 mm
  • Job

    Fixed knife
    Holds the bar in the bed
    Moving knife
    Gives the cutting impact
  • Steel

    Fixed knife
    Shock-resistant alloy tool steel
    Moving knife
    Shock-resistant alloy tool steel
  • Size

    Fixed knife
    55 × 98 × 450 mm
    Moving knife
    55 × 98 × 450 mm
  • Job

    Fixed knife
    Holds the bar in the bed
    Moving knife
    Gives the cutting impact
  • Steel

    Fixed knife
    Shock-resistant alloy tool steel
    Moving knife
    Shock-resistant alloy tool steel

TFI Co. also makes knives for the shearing line of Oscam T5 and T530 cut-to-length machines, and knives for bend-and-cut machines in different sizes.

How to choose the right knife

  • Largest bar

    tell us the biggest bar diameter you cut, and how many bars you cut at once.

  • Bar grade

    high-tensile rebar wears and loads the knife more than mild steel bar.

  • Cutting edges

    many rebar knives have more than one edge. Tell us how many edges your knife has, so you can turn it before you replace it.

  • Signs of wear

    a chipped edge, a bar end that is crushed instead of cut, or more noise during the cut.

  • Largest bar

    tell us the biggest bar diameter you cut, and how many bars you cut at once.

  • Bar grade

    high-tensile rebar wears and loads the knife more than mild steel bar.

  • Cutting edges

    many rebar knives have more than one edge. Tell us how many edges your knife has, so you can turn it before you replace it.

  • Signs of wear

    a chipped edge, a bar end that is crushed instead of cut, or more noise during the cut.

Send these details for your bulk quotation

  • Machine make and model, for example SCHNELL CGS 450

  • Knife size (mm) and the hole pattern, or a drawing

  • Fixed, moving, or both

  • Largest bar diameter and bar grade

  • Quantity band, and one-off or repeat order

  • Machine make and model, for example SCHNELL CGS 450

  • Knife size (mm) and the hole pattern, or a drawing

  • Fixed, moving, or both

  • Largest bar diameter and bar grade

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of the knife you use now, with a tape measure beside it, is enough to start.

How a bulk order works

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the machine model, size, holes and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the machine model, size, holes and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so the next batch is the same part.

Where rebar knives are used

  • Rebar cutting and bending yards

  • Precast concrete plants

  • Construction steel processing centres

  • Rebar machine dealers and service companies

  • Distributors of machine spare parts

  • Rebar cutting and bending yards

  • Precast concrete plants

  • Construction steel processing centres

  • Rebar machine dealers and service companies

  • Distributors of machine spare parts

Do you make knives for SCHNELL machines?

Yes. For example, TFI Co. makes the fixed and moving knives (55 × 98 × 450 mm) for the SCHNELL CGS 450. For other models, send the model and the knife sizes.

Can I order only the moving knife?

Yes. You can order single knives or complete sets.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the steel and the quantity band. You receive a written quotation before you order.

Machine names are trade marks of their owners and are used only to show fit. TFI Co. makes replacement parts and is not connected with the machine makers.

Section
Shear and Straight Knives
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote