On this page7
Profiled shear blades for sandwich panels and trapezoidal sheets, made to your profile. TFI Co. has made steel blades since 1965. We supply roll-forming line makers, panel factories and distributors who order 50 to 5,000+ pcs.
- Blades
- Upper and lower profiled shear blades
- For
- Cut-off shears on roll-forming and panel lines
- Cuts
- Trapezoidal roof and wall sheets, corrugated sheets, sandwich panel skins
- Made
- To your profile drawing or a sample
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- Blades
- Upper and lower profiled shear blades
- For
- Cut-off shears on roll-forming and panel lines
- Cuts
- Trapezoidal roof and wall sheets, corrugated sheets, sandwich panel skins
- Made
- To your profile drawing or a sample
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
Why the blade follows the profile
A roll-forming line bends flat coil into a ribbed sheet. At the end of the line, a shear cuts the sheet to length. A flat blade would crush the ribs. So the blades are cut to the same shape as the sheet: the upper blade fits over the ribs and the lower blade fits under them. Each sheet profile needs its own pair of blades.
Fit and gap
The upper and lower blades must match exactly. The gap between them follows the steel thickness, just like on a straight shear. With too big a gap, the cut edge bends and gets a burr. With too small a gap, the blades wear fast and can chip at the corners of the ribs.
Signs the blades need attention
A burr or a bent edge on the cut end
Ribs that are crushed or torn at the cut
Painted or coated sheet that peels at the edge
Chipped corners on the profile
A burr or a bent edge on the cut end
Ribs that are crushed or torn at the cut
Painted or coated sheet that peels at the edge
Chipped corners on the profile
Regrind the upper and lower blades together, and keep the profile shape. Keep a spare pair, so the line does not stop.
Sandwich panels
Sandwich panels have two metal skins with an insulating core between them. Many lines shape and cut the skins before the core is added, using profiled shear blades. Tell us which skin profile you cut, and whether the sheet is painted or coated.
Send these details for your bulk quotation
Profile
A drawing of the sheet profile, with rib height and pitch
Blade size
Length × height × thickness, and the hole pattern
Sheet
Steel or aluminium, thickness, painted or not
Line
Roll-forming line make and model
Quantity
Your band, and one-off or repeat order
Profile
A drawing of the sheet profile, with rib height and pitch
Blade size
Length × height × thickness, and the hole pattern
Sheet
Steel or aluminium, thickness, painted or not
Line
Roll-forming line make and model
Quantity
Your band, and one-off or repeat order
No drawing? A photo of the blade you use now, with a tape measure beside it, plus a cut piece of the sheet, is enough to start.
How a bulk order works
You send
the machine, the knife sizes or drawing, and your quantity band.
Our team checks
the profile, gap and hole pattern, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the machine, the knife sizes or drawing, and your quantity band.
Our team checks
the profile, gap and hole pattern, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawing on file, so every batch fits the same way.
Who buys profiled shear blades
- Roof and wall sheet makers
- Sandwich panel factories
- Roll-forming machine builders
- Knife grinding shops and distributors
- Roof and wall sheet makers
- Sandwich panel factories
- Roll-forming machine builders
- Knife grinding shops and distributors
Can you make blades for my sheet profile?
Yes. Send the profile drawing, or a cut piece of the sheet, and we make the upper and lower blades to match.
Do you sell single blades or pairs?
Both. Most lines order matched pairs, so the upper and lower blades fit each other.
What is the smallest order?
These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the length, the profile, the steel and the quantity band. You receive a written quotation before you order.
- Section
- Shear and Straight Knives
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote