On this page7
  1. Why dealers order Polar knives in bulk
  2. How to identify your knife
  3. HSS or TC inlay for Polar cutters
  4. Changing the knife safely
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who uses Polar knives

Replacement knives for Polar paper cutters. TFI Co. has made steel blades since 1965, including knives for Polar 97 and Polar 115 cutters. We supply dealers, print shops and print-finishing plants who order 50 to 5,000+ pcs, in high-speed steel (HSS) or with a tungsten carbide (TC) inlay.

Fits
Polar paper cutters: send your model and its width
Edge
HSS, or tungsten carbide (TC) inlay
Made
To the size and hole pattern of your present knife
For
Dealers, print shops, print-finishing and packaging plants
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Fits
Polar paper cutters: send your model and its width
Edge
HSS, or tungsten carbide (TC) inlay
Made
To the size and hole pattern of your present knife
For
Dealers, print shops, print-finishing and packaging plants
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Why dealers order Polar knives in bulk

Polar cutters are found in many print shops, so dealers and service companies keep knives in stock for their customers. A print shop also needs at least two knives per machine: one in the machine and one at the grinder or ready on the shelf. Ordering in a quantity band gives you one price for the whole batch and the same knife every time.

How to identify your knife

  • Machine model

    it is on the machine plate, for example Polar 115.

  • Sizes

    measure length, height and thickness in mm on the present knife.

  • Holes

    count the bolt holes and measure their size and spacing.

  • Height

    a knife that has been reground many times is lower than a new one. Tell us the height of a new knife if you know it, or send the drawing.

  • Machine model

    it is on the machine plate, for example Polar 115.

  • Sizes

    measure length, height and thickness in mm on the present knife.

  • Holes

    count the bolt holes and measure their size and spacing.

  • Height

    a knife that has been reground many times is lower than a new one. Tell us the height of a new knife if you know it, or send the drawing.

HSS or TC inlay for Polar cutters

HSS knives suit most print work and are easy to regrind. TC-inlaid knives stay sharp longer on coated paper, recycled board and long runs, but they need a diamond wheel for regrinding and must be handled with care, because carbide can chip if it is hit.

Changing the knife safely

A paper knife is long, heavy and very sharp. Always change it with the knife-changing tools and the knife box that came with your cutter, and follow the machine maker's instructions. Never carry a bare knife by hand. When the knife is not in the machine, keep it in its box with a thin coat of oil against rust.

Send these details for your bulk quotation

  • Polar model (for example 97 or 115)

  • Knife length × height × thickness (mm), and the bolt hole pattern

  • HSS or TC inlay

  • Quantity band, and one-off or repeat order

  • Polar model (for example 97 or 115)

  • Knife length × height × thickness (mm), and the bolt hole pattern

  • HSS or TC inlay

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of your knife, with a tape measure beside it, is enough to start.

How a bulk order works

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the model, size, hole pattern and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the model, size, hole pattern and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so the next batch is the same part.

Who uses Polar knives

  • Dealers and service companies for Polar cutters

  • Print shops and print finishing

  • Bookbinders and publishers

  • Packaging and label converters

  • Dealers and service companies for Polar cutters

  • Print shops and print finishing

  • Bookbinders and publishers

  • Packaging and label converters

Which Polar models do you make knives for?

TFI Co. has made knives for the Polar 97 and Polar 115. For other models, send the model and the knife sizes.

Are these original Polar parts?

No. These are replacement knives made by TFI Co. to fit Polar cutters.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the steel and the quantity band. You receive a written quotation before you order.

Machine names are trade marks of their owners and are used only to show fit. TFI Co. makes replacement parts and is not connected with the machine makers.

Section
Shear and Straight Knives
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote