On this page8
  1. What an inlaid TC knife is
  2. Solid steel, HSS or TC inlay
  3. When a TC inlay pays back
  4. Knives TFI Co. has made
  5. Care and regrinding
  6. Send these details for your bulk quotation
  7. How a bulk order works
  8. Where inlaid TC knives are used

Knives with an inlaid tungsten carbide (TC) edge, made to your drawing. TFI Co. has made steel blades since 1965, including TC-inlaid paper cutting knives. We supply factories and distributors who order 50 to 5,000+ pcs.

Build
A tungsten carbide strip joined into a steel body
Edge
Hard, long-wearing carbide
Body
Tough steel that takes the bolts and the load
Made
To your drawing, to a sample, or from your machine model
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Build
A tungsten carbide strip joined into a steel body
Edge
Hard, long-wearing carbide
Body
Tough steel that takes the bolts and the load
Made
To your drawing, to a sample, or from your machine model
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

What an inlaid TC knife is

Tungsten carbide is much harder than tool steel, so it keeps a sharp edge for longer. But a knife made only of carbide would be brittle and very costly. An inlaid knife puts a strip of carbide only where the cutting happens, along the edge. The rest of the knife is steel. You get the long life of carbide at the edge and the toughness of steel in the body.

Solid steel, HSS or TC inlay

  • Edge life

    Tool steel
    Good
    HSS
    Better
    TC inlay
    Longest
  • Resistance to knocks

    Tool steel
    Best
    HSS
    Good
    TC inlay
    Lower: carbide can chip
  • Regrinding

    Tool steel
    Normal wheel
    HSS
    Normal wheel
    TC inlay
    Diamond wheel
  • Best for

    Tool steel
    Impact and heavy shock
    HSS
    General cutting
    TC inlay
    Long runs and abrasive materials
  • Edge life

    Tool steel
    Good
    HSS
    Better
    TC inlay
    Longest
  • Resistance to knocks

    Tool steel
    Best
    HSS
    Good
    TC inlay
    Lower: carbide can chip
  • Regrinding

    Tool steel
    Normal wheel
    HSS
    Normal wheel
    TC inlay
    Diamond wheel
  • Best for

    Tool steel
    Impact and heavy shock
    HSS
    General cutting
    TC inlay
    Long runs and abrasive materials

When a TC inlay pays back

  • Your machine stops often for knife changes, and each stop costs production time.

  • The material is abrasive: coated paper, recycled board, wood with glue, fibre or filled plastics.

  • You run long jobs with the same knife and want fewer regrinds.

  • Your machine stops often for knife changes, and each stop costs production time.

  • The material is abrasive: coated paper, recycled board, wood with glue, fibre or filled plastics.

  • You run long jobs with the same knife and want fewer regrinds.

A TC inlay is not the best choice when the knife takes heavy shocks or when metal parts (nails, staples) often reach the edge. Then a tough steel knife is safer.

Knives TFI Co. has made

TFI Co. makes paper cutting knives in HSS or with a special tungsten carbide inlay, for passport printing, valuable-paper printing and newspaper presses. We make TC-inlaid knives for other machines to the customer drawing.

Care and regrinding

  • Regrind only with a diamond wheel and coolant.

  • Keep the original edge angle.

  • Store and carry the knife in its box; a knock on the edge can chip the carbide.

  • Regrind only with a diamond wheel and coolant.

  • Keep the original edge angle.

  • Store and carry the knife in its box; a knock on the edge can chip the carbide.

Send these details for your bulk quotation

  • Knife length × width × thickness (mm), and the edge angle

  • Hole pattern, or the machine make and model

  • The material you cut

  • How long your present knife lasts between regrinds

  • Quantity band, and one-off or repeat order

  • Knife length × width × thickness (mm), and the edge angle

  • Hole pattern, or the machine make and model

  • The material you cut

  • How long your present knife lasts between regrinds

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of the knife you use now, with a tape measure beside it, is enough to start.

How a bulk order works

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the size, holes, edge angle and inlay, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the size, holes, edge angle and inlay, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so the next batch is the same part.

Where inlaid TC knives are used

  • Paper cutters and print finishing
  • Security and newspaper printing
  • Wood planing and chipping
  • Paper and plastic recycling machines
  • Paper cutters and print finishing
  • Security and newspaper printing
  • Wood planing and chipping
  • Paper and plastic recycling machines

Can you make a TC-inlaid version of my steel knife?

Yes, in most cases with the same size and holes. Send the drawing or the sizes of your present knife.

Can I regrind a TC-inlaid knife myself?

Only with a diamond wheel. A normal grinding wheel does not cut carbide well.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the steel and the quantity band. You receive a written quotation before you order.

Section
Shear and Straight Knives
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote