On this page7
  1. Where blades wear in a board plant
  2. Why the knives wear fast
  3. Flaker knife tips
  4. Scoring and main saw
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who buys particle board blades

Blades and knives for particle board and MDF production. From the chipper at the start of the line to the panel saw at the end. TFI Co. has made steel blades since 1965. We supply factories, tool shops and distributors who order 50 to 5,000+ pcs.

Knives
Flaker knives, chipper knives, counter knives
Saw blades
Panel sizing saws and scoring saws
Steel
Tool steel, heat-treated for wood with sand and grit
Made
To your drawing or sample
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Knives
Flaker knives, chipper knives, counter knives
Saw blades
Panel sizing saws and scoring saws
Steel
Tool steel, heat-treated for wood with sand and grit
Made
To your drawing or sample
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Where blades wear in a board plant

  • Chippers

    Cut logs and wood waste into chips. See our chipper knives.

  • Flakers

    Cut chips into thin flakes with many knives on a ring. The flake quality decides the board quality.

  • Panel saws

    Cut the finished boards to size. A small scoring saw cuts the surface first, so laminated boards do not chip.

  • Chippers

    Cut logs and wood waste into chips. See our chipper knives.

  • Flakers

    Cut chips into thin flakes with many knives on a ring. The flake quality decides the board quality.

  • Panel saws

    Cut the finished boards to size. A small scoring saw cuts the surface first, so laminated boards do not chip.

Why the knives wear fast

Recycled wood brings sand, stones and metal into the machine. These dull the edge and can break it. A plant needs many knives in use and many at the grinder. Steady supply in bulk keeps the line running.

Flaker knife tips

  • Change the whole knife ring set at one time, so the flakes stay even.

  • Grind all knives of a set to the same width.

  • Check the knife projection after every change.

  • Change the whole knife ring set at one time, so the flakes stay even.

  • Grind all knives of a set to the same width.

  • Check the knife projection after every change.

Scoring and main saw

On laminated boards, the scoring saw runs in front of the main saw and cuts a shallow groove in the bottom face. The two blades must match in width. Send both sizes when you order.

Send these details for your bulk quotation

  • Knives

    Length × width × thickness, bevel, and hole or slot pattern

  • Saw blades

    Diameter × thickness × bore and number of teeth

  • Machine

    Make and model of the chipper, flaker or panel saw

  • Wood

    Fresh logs, chips or recycled wood

  • Quantity

    Your band, and one-off or repeat order

  • Knives

    Length × width × thickness, bevel, and hole or slot pattern

  • Saw blades

    Diameter × thickness × bore and number of teeth

  • Machine

    Make and model of the chipper, flaker or panel saw

  • Wood

    Fresh logs, chips or recycled wood

  • Quantity

    Your band, and one-off or repeat order

No drawing? A phone photo of the knife or blade you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, bevel, holes and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, bevel, holes and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so every batch is made the same way.

Who buys particle board blades

  • Particle board, OSB and MDF plants
  • Wood recycling and chip plants
  • Panel cutting and furniture factories
  • Knife grinding shops and distributors
  • Particle board, OSB and MDF plants
  • Wood recycling and chip plants
  • Panel cutting and furniture factories
  • Knife grinding shops and distributors

Do you supply full flaker knife sets?

Yes. Send the number of knives per ring and the drawing, and we quote per set or per piece.

Can the knives be reground?

Yes. Keep the same width across a set, and replace knives that are too narrow.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the teeth, the steel or carbide, and the quantity band. You receive a written quotation before you order.

Section
Saw Blades: Carbide and Wood
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote