On this page7
  1. Which blade for which job
  2. Choose the tooth pitch
  3. Signs that a blade needs attention
  4. Keep a stock of blades
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who buys circular saw blades for metal

Circular saw blades for metal cutting, made to your size. TFI Co. has made steel blades since 1965. We supply factories, tool shops and distributors who order 50 to 5,000+ pcs.

Types
HSS cold saw blades, TiN-coated blades, carbide-tipped (TC) blades
For
Steel tube, solid bar, profiles, aluminium and non-ferrous metal
Made
To your size, drawing or sample
Sizes
Diameter × thickness × bore to order, with your pin holes
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Types
HSS cold saw blades, TiN-coated blades, carbide-tipped (TC) blades
For
Steel tube, solid bar, profiles, aluminium and non-ferrous metal
Made
To your size, drawing or sample
Sizes
Diameter × thickness × bore to order, with your pin holes
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Which blade for which job

  • HSS cold saw blades

    For steel tube, bar and profiles on cold saws. They run at low speed with cutting fluid, so the cut stays cool and clean. See our cold saw blades.

  • TiN-coated HSS blades

    The gold coating is hard and smooth. It helps the chips slide off and protects the edge on long runs.

  • Carbide-tipped (TC) blades

    Carbide tips on a steel body. They run faster and suit aluminium, non-ferrous metal and high-volume lines. See TC circular blades.

  • HSS cold saw blades

    For steel tube, bar and profiles on cold saws. They run at low speed with cutting fluid, so the cut stays cool and clean. See our cold saw blades.

  • TiN-coated HSS blades

    The gold coating is hard and smooth. It helps the chips slide off and protects the edge on long runs.

  • Carbide-tipped (TC) blades

    Carbide tips on a steel body. They run faster and suit aluminium, non-ferrous metal and high-volume lines. See TC circular blades.

Choose the tooth pitch

The tooth pitch is the distance from one tooth to the next. Thin walls need fine teeth, thick sections need coarse teeth. As a rule, at least two or three teeth should be in the cut at the same time. With too few teeth in the cut, the teeth can catch and break. With too many, the gullets fill with chips and the blade overheats.

Signs that a blade needs attention

  • A large burr on the cut end

  • The cut runs out of square

  • Blue or burnt chips, or more noise than usual

  • Chipped or missing teeth

  • A large burr on the cut end

  • The cut runs out of square

  • Blue or burnt chips, or more noise than usual

  • Chipped or missing teeth

Check the speed, the feed and the cutting fluid first. Then resharpen the blade, or replace it if teeth are missing.

Keep a stock of blades

A saw that waits for a blade costs more than a spare blade. Plan for blades in use, blades at the grinder and blades on the shelf. A bulk order in the right band keeps the line running and keeps the price per blade lower.

Send these details for your bulk quotation

  • Size

    Diameter × thickness × bore, in mm, and any pin holes

  • Teeth

    Number of teeth and tooth shape, or the pitch

  • Material

    What you cut, with its size or wall thickness

  • Machine

    Saw make and model, and the blade speed if you know it

  • Quantity

    Your band, and one-off or repeat order

  • Size

    Diameter × thickness × bore, in mm, and any pin holes

  • Teeth

    Number of teeth and tooth shape, or the pitch

  • Material

    What you cut, with its size or wall thickness

  • Machine

    Saw make and model, and the blade speed if you know it

  • Quantity

    Your band, and one-off or repeat order

No drawing? A phone photo of the blade you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, teeth, steel and coating, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, teeth, steel and coating, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so every batch is made the same way.

Who buys circular saw blades for metal

  • Steel tube and profile makers
  • Fabrication and steel structure shops
  • Steel stockholders cutting to length
  • Tool shops and saw blade distributors
  • Steel tube and profile makers
  • Fabrication and steel structure shops
  • Steel stockholders cutting to length
  • Tool shops and saw blade distributors

HSS or carbide-tipped: which is better?

It depends on the material, the saw and the speed. HSS suits cold saws on steel. Carbide-tipped suits high speed and non-ferrous metal. Tell us your saw and material, and we advise.

Can the blades be resharpened?

Yes. Saw blades are made to be resharpened several times. Regrind before the teeth are badly worn, and keep the original tooth shape.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the teeth, the steel or carbide, and the quantity band. You receive a written quotation before you order.

Section
Saw Blades: Carbide and Wood
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote