On this page7
  1. Why aluminium needs its own blade
  2. Tooth shape
  3. Lubrication
  4. Signs of a problem
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who buys aluminium saw blades

Circular saw blades for aluminium, copper and brass. For window and door profiles, extrusions and bar. TFI Co. has made steel blades since 1965. We supply factories, tool shops and distributors who order 50 to 5,000+ pcs.

Cuts
Aluminium profiles and extrusions, copper and brass bar
Blades
Carbide-tipped (TC) circular saw blades
Machines
Profile mitre saws, double-head saws, automatic cut-off saws
Made
To your size, drawing or sample
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Cuts
Aluminium profiles and extrusions, copper and brass bar
Blades
Carbide-tipped (TC) circular saw blades
Machines
Profile mitre saws, double-head saws, automatic cut-off saws
Made
To your size, drawing or sample
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Why aluminium needs its own blade

Aluminium is soft and sticky. The chips can weld onto the teeth and clog the gullets. A blade for steel will cut aluminium badly. A blade for aluminium has a tooth shape and hook angle made for soft metal, and enough space for the chips.

Tooth shape

  • Triple-chip teeth

    A common choice for aluminium and non-ferrous metal. One tooth cuts the middle, the next cuts the corners, so the load is shared.

  • Negative or low hook angle

    The tooth leans back a little. This stops the blade from pulling the profile in, which matters on mitre and chop saws.

  • Fine pitch for thin profiles

    Hollow window profiles need more teeth than solid bar.

  • Triple-chip teeth

    A common choice for aluminium and non-ferrous metal. One tooth cuts the middle, the next cuts the corners, so the load is shared.

  • Negative or low hook angle

    The tooth leans back a little. This stops the blade from pulling the profile in, which matters on mitre and chop saws.

  • Fine pitch for thin profiles

    Hollow window profiles need more teeth than solid bar.

Lubrication

Many aluminium saws use a mist of lubricant on the teeth. It stops the chips from sticking and gives a cleaner cut face. If your saw cuts dry, tell us, because it changes the best blade choice.

Signs of a problem

  • Aluminium stuck on the teeth

  • A rough or torn cut face, or a large burr

  • Profiles that move or jump in the clamp

  • Chipped carbide tips

  • Aluminium stuck on the teeth

  • A rough or torn cut face, or a large burr

  • Profiles that move or jump in the clamp

  • Chipped carbide tips

Clean the teeth, check the lubrication and the clamping, then resharpen if needed.

Send these details for your bulk quotation

  • Size

    Diameter × thickness × bore, in mm, and any pin holes

  • Teeth

    Number of teeth and tooth shape

  • Material

    Alloy, and profile or bar size

  • Machine

    Saw type, make and model, dry or with mist

  • Quantity

    Your band, and one-off or repeat order

  • Size

    Diameter × thickness × bore, in mm, and any pin holes

  • Teeth

    Number of teeth and tooth shape

  • Material

    Alloy, and profile or bar size

  • Machine

    Saw type, make and model, dry or with mist

  • Quantity

    Your band, and one-off or repeat order

No drawing? A phone photo of the blade you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, tooth shape and hook angle, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, tooth shape and hook angle, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so every batch is made the same way.

Who buys aluminium saw blades

  • Aluminium window, door and façade makers
  • Extrusion plants and profile finishers
  • Copper and brass bar processors
  • Saw blade distributors and tool shops
  • Aluminium window, door and façade makers
  • Extrusion plants and profile finishers
  • Copper and brass bar processors
  • Saw blade distributors and tool shops

Can I use a steel-cutting blade on aluminium?

It is not a good idea. The chips stick, the cut is rough and the blade wears fast. Use a blade made for non-ferrous metal.

Can the blades be resharpened?

Yes. Saw blades are made to be resharpened several times. Regrind before the teeth are badly worn, and keep the original tooth shape.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the teeth, the steel or carbide, and the quantity band. You receive a written quotation before you order.

Section
Saw Blades: Carbide and Wood
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote