On this page7
Veneer peeling knives for rotary peeling lathes, made to your drawing. Also called shelling knives. TFI Co. has made steel blades since 1965. We supply plywood and veneer mills, knife grinding shops and distributors who order 50 to 5,000+ pcs.
- Knife
- Long straight peeling knife with mounting slots and holes
- For
- Rotary veneer peeling lathes
- Made
- To your drawing, to a sample, or from your lathe model
- Steel
- Tool steel, heat-treated for a long, straight edge
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- Knife
- Long straight peeling knife with mounting slots and holes
- For
- Rotary veneer peeling lathes
- Made
- To your drawing, to a sample, or from your lathe model
- Steel
- Tool steel, heat-treated for a long, straight edge
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
What a peeling knife does
On a rotary lathe, a log turns against a long knife. The knife peels off a continuous sheet of veneer, like paper from a roll. The veneer is then dried, cut and glued into plywood. A pressure bar runs just in front of the knife and holds the wood, so the sheet comes off even and without deep cracks.
Why straightness matters
The knife is long and thin, and it must stay straight along its full length. A bent or uneven knife gives veneer that is thick at one end and thin at the other. That means waste at the dryer and the press. Send the length, width and thickness, and the slot pattern, so the knife sits on your knife holder the same way every time.
Signs a knife needs grinding
Rough or hairy veneer surface
Uneven veneer thickness across the sheet
Deep cracks on the loose side of the veneer
Small nicks in the edge from knots, stones or metal
Rough or hairy veneer surface
Uneven veneer thickness across the sheet
Deep cracks on the loose side of the veneer
Small nicks in the edge from knots, stones or metal
Grind the knife before the edge is badly worn, and keep the same bevel angle. Keep spare knives sharp and ready, so the lathe does not wait.
Wood and the knife
Hard, frozen or dirty logs are harder on the edge. Logs are often soaked or steamed before peeling, which makes the wood softer and the veneer smoother. If your logs carry sand or metal, tell us, so we choose the right steel.
Send these details for your bulk quotation
Lathe
Make and model
Size
Length × width × thickness, in mm
Slots and holes
The pattern, or a drawing
Bevel
The edge angle you use now
Quantity
Your band, and one-off or repeat order
Lathe
Make and model
Size
Length × width × thickness, in mm
Slots and holes
The pattern, or a drawing
Bevel
The edge angle you use now
Quantity
Your band, and one-off or repeat order
No drawing? A phone photo of the knife you use now, with a tape measure beside it, is enough to start.
How a bulk order works
You send
the machine, the knife sizes or drawing, and your quantity band.
Our team checks
the length, slots, bevel and steel, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the machine, the knife sizes or drawing, and your quantity band.
Our team checks
the length, slots, bevel and steel, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawing on file, so every batch fits the same way.
Who buys peeling knives
- Plywood and veneer mills
- Wood-based panel factories
- Knife grinding shops
- Woodworking tool distributors
- Plywood and veneer mills
- Wood-based panel factories
- Knife grinding shops
- Woodworking tool distributors
Is a shelling knife the same as a peeling knife?
Yes. Both names are used for the long knife on a rotary veneer lathe.
Can you match the slot pattern of my knife?
Yes. Send a drawing or a photo with sizes, and we copy the slots and holes.
What is the smallest order?
These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the length, the profile, the steel and the quantity band. You receive a written quotation before you order.
- Section
- Saw Blades: Carbide and Wood
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote