On this page7
  1. How a TC blade works
  2. TC or HSS?
  3. Common tooth shapes
  4. Care and resharpening
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who buys TC circular blades

Carbide-tipped (TC) circular saw blades. Tungsten carbide teeth on a steel body, for long runs and high speed. TFI Co. has made steel blades since 1965. We supply factories, tool shops and distributors who order 50 to 5,000+ pcs.

Build
Tungsten carbide tips on a hardened steel body
Cuts
Aluminium and non-ferrous metal, wood, panels, plastics
Teeth
Tooth count and shape to your job
Made
To your size, drawing or sample
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Build
Tungsten carbide tips on a hardened steel body
Cuts
Aluminium and non-ferrous metal, wood, panels, plastics
Teeth
Tooth count and shape to your job
Made
To your size, drawing or sample
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

How a TC blade works

Each tooth is a small piece of tungsten carbide, joined to the steel body. Carbide is much harder than tool steel, so the edge stays sharp longer on abrasive material. The steel body stays tough, so the blade can take the load of the cut.

TC or HSS?

  • TC blades

    Higher speed, longer edge life on aluminium, wood, panels and plastics. The tips are hard but can chip on shock.

  • HSS blades

    Tougher, and the usual choice for steel on cold saws at low speed. See cold saw blades.

  • TC blades

    Higher speed, longer edge life on aluminium, wood, panels and plastics. The tips are hard but can chip on shock.

  • HSS blades

    Tougher, and the usual choice for steel on cold saws at low speed. See cold saw blades.

Common tooth shapes

  • Flat top

    Strong teeth for fast rip cuts in wood.

  • Alternate top bevel

    Clean cross-cuts in wood and panels.

  • Triple-chip

    For aluminium, non-ferrous metal, hard panels and plastics.

  • Flat top

    Strong teeth for fast rip cuts in wood.

  • Alternate top bevel

    Clean cross-cuts in wood and panels.

  • Triple-chip

    For aluminium, non-ferrous metal, hard panels and plastics.

Care and resharpening

  • Resharpen carbide only with a diamond wheel.

  • Do not let the tips run dull; a dull tip heats up and can crack.

  • Store blades in their sleeves, so the tips do not touch metal.

  • Check that the blade runs true, with clean flanges and a correct bore fit.

  • Resharpen carbide only with a diamond wheel.

  • Do not let the tips run dull; a dull tip heats up and can crack.

  • Store blades in their sleeves, so the tips do not touch metal.

  • Check that the blade runs true, with clean flanges and a correct bore fit.

Send these details for your bulk quotation

  • Size

    Diameter × thickness × bore, in mm, and any pin holes

  • Teeth

    Number of teeth and tooth shape, or the pitch

  • Material

    What you cut, with its size or wall thickness

  • Machine

    Saw make and model, and the blade speed if you know it

  • Quantity

    Your band, and one-off or repeat order

  • Size

    Diameter × thickness × bore, in mm, and any pin holes

  • Teeth

    Number of teeth and tooth shape, or the pitch

  • Material

    What you cut, with its size or wall thickness

  • Machine

    Saw make and model, and the blade speed if you know it

  • Quantity

    Your band, and one-off or repeat order

No drawing? A phone photo of the blade you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, tooth count and tooth shape, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the blade size, the teeth, what you cut and your quantity band.

  2. Our team checks

    the size, tooth count and tooth shape, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so every batch is made the same way.

Who buys TC circular blades

  • Aluminium and profile processors

  • Furniture, panel and joinery factories

  • Plastics processors

  • Saw blade distributors and resharpening shops

  • Aluminium and profile processors

  • Furniture, panel and joinery factories

  • Plastics processors

  • Saw blade distributors and resharpening shops

Can a TC blade cut steel?

Special TC blades exist for steel on dedicated machines. Tell us the steel and the saw, and we advise if TC or HSS is the better choice.

Can the carbide tips be resharpened?

Yes, several times, with a diamond wheel. Tips that are broken can be replaced by a resharpening shop.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the teeth, the steel or carbide, and the quantity band. You receive a written quotation before you order.

Section
Saw Blades: Carbide and Wood
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote