On this page7
Circular saw blades for cutting steel tube, pipe and profiles. For cold saws, cut-off saws and tube-mill lines. TFI Co. has made steel blades since 1965. We supply factories, tool shops and distributors who order 50 to 5,000+ pcs.
- Cuts
- Round, square and rectangular tube, pipe, open profiles
- Machines
- Cold saws, automatic cut-off saws, tube-mill cut-off lines
- Blades
- HSS, TiN-coated HSS, carbide-tipped and friction saw blades
- Made
- To your size, drawing or sample
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- Cuts
- Round, square and rectangular tube, pipe, open profiles
- Machines
- Cold saws, automatic cut-off saws, tube-mill cut-off lines
- Blades
- HSS, TiN-coated HSS, carbide-tipped and friction saw blades
- Made
- To your size, drawing or sample
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
Wall thickness decides the teeth
Tube is harder to cut than solid bar, because the teeth meet a thin wall. Thin walls need a fine tooth pitch, so that at least two or three teeth are always in the wall. Coarse teeth on thin tube catch, vibrate and break. For thick-wall pipe and heavy profiles, a coarser pitch gives room for the chips.
Cold saw, cut-off line or friction saw
Cold saw blades
Slow speed with cutting fluid. Clean, square cuts with a small burr, for fabrication and cut-to-length work.
Carbide-tipped blades
Higher speed for long series on automatic cut-off saws.
Friction saw blades
Very high speed on hot or fast tube-mill lines. The blade heats and melts the steel instead of cutting chips.
Cold saw blades
Slow speed with cutting fluid. Clean, square cuts with a small burr, for fabrication and cut-to-length work.
Carbide-tipped blades
Higher speed for long series on automatic cut-off saws.
Friction saw blades
Very high speed on hot or fast tube-mill lines. The blade heats and melts the steel instead of cutting chips.
Profile shape matters
Square and rectangular tube present a long flat wall to the blade at the start and end of the cut. Clamp the tube firmly, close to the blade, so the wall does not vibrate. For bundles, tell us how many pieces you cut at once.
Coolant and burr
Cold saws run with cutting fluid. It cools the teeth and washes the chips out of the gullets. A growing burr on the cut end is the first sign of a dull blade. Resharpen early, and the blade lasts more cycles.
Send these details for your bulk quotation
Size
Diameter × thickness × bore, in mm, and any pin holes
Teeth
Number of teeth or the pitch
Tube
Outside diameter, wall thickness and steel grade
Machine
Saw type, make and model
Quantity
Your band, and one-off or repeat order
Size
Diameter × thickness × bore, in mm, and any pin holes
Teeth
Number of teeth or the pitch
Tube
Outside diameter, wall thickness and steel grade
Machine
Saw type, make and model
Quantity
Your band, and one-off or repeat order
No drawing? A phone photo of the blade you use now, with a ruler beside it, is enough to start.
How a bulk order works
You send
the blade size, the teeth, what you cut and your quantity band.
Our team checks
the size, tooth pitch and blade type, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the blade size, the teeth, what you cut and your quantity band.
Our team checks
the size, tooth pitch and blade type, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawing on file, so every batch is made the same way.
Who buys tube and profile saw blades
- Tube mills and pipe makers
- Profile and steel section makers
- Furniture, rack and frame makers
- Saw blade distributors and tool shops
- Tube mills and pipe makers
- Profile and steel section makers
- Furniture, rack and frame makers
- Saw blade distributors and tool shops
Can you make friction saw blades for a tube mill?
Yes. Send the blade size, the line speed if you know it, and the tube size.
Can the blades be resharpened?
Yes. Saw blades are made to be resharpened several times. Regrind before the teeth are badly worn, and keep the original tooth shape.
What is the smallest order?
These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the size, the teeth, the steel or carbide, and the quantity band. You receive a written quotation before you order.
- Section
- Saw Blades: Carbide and Wood
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote