On this page9
Straight punches for press brakes, made to your drawing. TFI Co. has made steel tools since 1965. Our straight punches are made in 42CrMo4 steel, in angles from 30° to 90°, for fabricators, dealers and distributors who order 50 to 5,000+ pcs.
- Angles
- 30°, 85°, 86°, 90° and others to drawing
- Heights
- H100, H130 and H150 mm, and others
- Body
- 26 or 27 mm, and others
- Sets
- Full lengths or segmented sets
- Steel
- 42CrMo4, heat-treated
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- Angles
- 30°, 85°, 86°, 90° and others to drawing
- Heights
- H100, H130 and H150 mm, and others
- Body
- 26 or 27 mm, and others
- Sets
- Full lengths or segmented sets
- Steel
- 42CrMo4, heat-treated
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
Straight punches TFI Co. has made
EU3111
- Angle
- 86°
- Height × body
- H130 × B26 mm
- Note
- 835 mm set: 5 × 150 + 2 × 42.5 mm
EU3213 / EU3214
- Angle
- 86°
- Height × body
- H130 or H100 × B26 mm
- Note
- 3100 / 3200 series
EU3113
- Angle
- 30°
- Height × body
- H130 × B26 mm
- Note
- Acute bends and hems
Gold class
- Angle
- 85°
- Height × body
- H150 × B27 mm
- Note
- Taller punch for deeper parts
Silver class
- Angle
- 90°
- Height × body
- H150 × B27 mm
- Note
- General bending
EU3111
- Angle
- 86°
- Height × body
- H130 × B26 mm
- Note
- 835 mm set: 5 × 150 + 2 × 42.5 mm
EU3213 / EU3214
- Angle
- 86°
- Height × body
- H130 or H100 × B26 mm
- Note
- 3100 / 3200 series
EU3113
- Angle
- 30°
- Height × body
- H130 × B26 mm
- Note
- Acute bends and hems
Gold class
- Angle
- 85°
- Height × body
- H150 × B27 mm
- Note
- Taller punch for deeper parts
Silver class
- Angle
- 90°
- Height × body
- H150 × B27 mm
- Note
- General bending
Choose the angle
85°–90°
For most right-angle bends. A slightly smaller angle than 90° allows for spring-back.
30°
For acute bends and as the first step of a hem.
Radius tip
The tip radius should suit the inside radius you need and the sheet thickness.
85°–90°
For most right-angle bends. A slightly smaller angle than 90° allows for spring-back.
30°
For acute bends and as the first step of a hem.
Radius tip
The tip radius should suit the inside radius you need and the sheet thickness.
Choose the height
Punch height decides how deep a box or channel you can bend. A taller punch (for example H150) leaves more room for side flanges. All punches in one line must have the same working height, or the bend angle changes along the part. That is why many shops order a full set in one batch.
Segmented sets
A segmented set lets you build the length you need. For example, an 835 mm set made of 5 × 150 mm and 2 × 42.5 mm segments can bend short parts and still make a full 835 mm length. Segments from one batch have the same height and fit side by side.
When to use a gooseneck or sash punch
If a straight punch hits the part (for example on U-shapes or deep boxes), use a gooseneck or sash punch. TFI Co. makes both.
Clamping style
European (Promecam / AFH) style
The most common clamping today, used on many Amada, Bystronic, Durma and Ermaksan press brakes.
Other styles
TFI Co. also makes tools in Beyeler / Safan style and Gasparini style. For other clamping, send a photo of the tool top.
European (Promecam / AFH) style
The most common clamping today, used on many Amada, Bystronic, Durma and Ermaksan press brakes.
Other styles
TFI Co. also makes tools in Beyeler / Safan style and Gasparini style. For other clamping, send a photo of the tool top.
Send these details for your bulk quotation
Punch angle, height, body width and tip radius, or the EU drawing number
Clamping style and machine model
Length: full length or segment plan
Material and thickness you bend
Quantity band, and one-off or repeat order
Punch angle, height, body width and tip radius, or the EU drawing number
Clamping style and machine model
Length: full length or segment plan
Material and thickness you bend
Quantity band, and one-off or repeat order
No drawing? A phone photo of the punch end profile, with a ruler beside it, is enough to start.
How a bulk order works
You send
the machine, clamping style and tool profiles, and your quantity band.
Our team checks
the angle, height, tip radius, tang and segments, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the machine, clamping style and tool profiles, and your quantity band.
Our team checks
the angle, height, tip radius, tang and segments, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawings on file, so every new tool matches the tools you already have.
Who uses straight punches
Fabrication shops bending panels and brackets
Enclosure and cabinet makers
Structural profile makers
Press brake dealers and tool distributors
Fabrication shops bending panels and brackets
Enclosure and cabinet makers
Structural profile makers
Press brake dealers and tool distributors
Do you make punches to EU drawing numbers?
Yes, for example EU3111, EU3113, EU3213 and EU3214. Send the number and the length you need.
Can I mix your punches with my present tools?
Only if the working height matches exactly. Send the height of your present punches.
What is the smallest order?
These pages are for bulk orders from 50 pcs (tools or segments). If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the profile, length, steel and quantity band. You receive a written quotation before you order.
Machine names are trade marks of their owners and are used only to show fit. TFI Co. makes its own tools and is not connected with the machine makers.
- Section
- Press Brake and Punching Tools
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote