On this page8
  1. How the V-opening shapes the bend
  2. Example: 4-way die BM_60_60
  3. Example: two-groove acute die BM_47_46
  4. Single-V or multi-V?
  5. Mark-free bending
  6. Send these details for your bulk quotation
  7. How a bulk order works
  8. Who uses these dies

Press brake dies (bending matrixes), made to your drawing. TFI Co. has made steel tools since 1965. We make single-V, multi-V and 4-way dies in 42CrMo4 steel for fabricators, dealers and distributors who order 50 to 5,000+ pcs.

Die types
Single-V, two-groove, multi-V and 4-way rotatable blocks
Angles
85°, 86°, 30° acute, and others to drawing
Steel
42CrMo4, heat-treated
Lengths
Full lengths such as 3,200 mm, or segments
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Die types
Single-V, two-groove, multi-V and 4-way rotatable blocks
Angles
85°, 86°, 30° acute, and others to drawing
Steel
42CrMo4, heat-treated
Lengths
Full lengths such as 3,200 mm, or segments
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

How the V-opening shapes the bend

The die is the lower tool. The sheet sits across its V-opening, and the punch presses it in. The width of the V decides three things: the inside radius, the shortest flange you can bend, and the force needed. A common starting rule is V = about 8 × sheet thickness for mild steel. Thicker or harder material often needs a wider V.

Example: 4-way die BM_60_60

Body
60 × 60 mm, 3,200 mm long
Grooves
Four 85° V-openings: 50, 35, 22 and 16 mm
Covers
About 2–6 mm sheet in one block
Steel
42CrMo4
Tolerances
DIN 7168 fine, as stated on the TFI Co. product sheet
Body
60 × 60 mm, 3,200 mm long
Grooves
Four 85° V-openings: 50, 35, 22 and 16 mm
Covers
About 2–6 mm sheet in one block
Steel
42CrMo4
Tolerances
DIN 7168 fine, as stated on the TFI Co. product sheet

A 4-way die has a different V-opening on each side. You turn the block to change the V, so one die serves many jobs. This suits shops with many small batches.

Example: two-groove acute die BM_47_46

A compact 47 × 46 mm die with two 30° acute grooves, 8 mm and 12 mm, for about 1–1.5 mm sheet. Acute dies are used for hems and for bends sharper than 90°.

Single-V or multi-V?

  • Single-V

    Strongest for heavy work and long series of one thickness.

  • Multi-V and 4-way

    Fewer tool changes when the thickness changes often.

  • Light-duty multi-groove dies

    For thin sheet, for example kitchen and catering equipment.

  • Single-V

    Strongest for heavy work and long series of one thickness.

  • Multi-V and 4-way

    Fewer tool changes when the thickness changes often.

  • Light-duty multi-groove dies

    For thin sheet, for example kitchen and catering equipment.

Mark-free bending

Dies can leave lines on stainless, aluminium and coated sheet. Anti-mark film between the die and the sheet prevents these marks. See our anti-mark film page.

Send these details for your bulk quotation

  • Die profile: V-openings, angles and die height

  • Body width, and the clamping or tang style

  • Length: full length or segments

  • Material and thickness range you bend, and machine tonnage

  • Quantity band, and one-off or repeat order

  • Die profile: V-openings, angles and die height

  • Body width, and the clamping or tang style

  • Length: full length or segments

  • Material and thickness range you bend, and machine tonnage

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of the die end profile, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the machine, clamping style and tool profiles, and your quantity band.

  2. Our team checks

    the V-openings, angles, height and tonnage limits, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the machine, clamping style and tool profiles, and your quantity band.

  2. Our team checks

    the V-openings, angles, height and tonnage limits, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawings on file, so every new tool matches the tools you already have.

Who uses these dies

  • Sheet-metal fabrication shops

  • Kitchen and catering equipment makers

  • Enclosure, cabinet and panel makers

  • Press brake dealers and tool distributors

  • Sheet-metal fabrication shops

  • Kitchen and catering equipment makers

  • Enclosure, cabinet and panel makers

  • Press brake dealers and tool distributors

What is the maximum force for a die?

Each die has a tonnage limit per metre. Tell us your material, thickness and V-opening, and we give the limit with the quotation.

Can you make dies in segments?

Yes. Send the lengths you need, or the segment plan of your present tools.

What is the smallest order?

These pages are for bulk orders from 50 pcs (tools or segments). If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the profile, length, steel and quantity band. You receive a written quotation before you order.

Section
Press Brake and Punching Tools
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote