On this page7
  1. What a notcher does
  2. Fixed or variable angle
  3. Signs of worn blades
  4. Regrinding tips
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who uses notching blades

Notching blades for sheet-metal notching machines, made to your drawing. TFI Co. has made steel blades and tools since 1965. We supply fabrication shops, duct makers, machine dealers and distributors who order 50 to 5,000+ pcs.

For
Fixed-angle (90°) and variable-angle notching machines
Parts
Upper and lower notching blades, sold as single blades or sets
Steel
Tool steel, heat-treated for edge life on sheet steel
Made
To your drawing, to a sample, or from your machine model
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
For
Fixed-angle (90°) and variable-angle notching machines
Parts
Upper and lower notching blades, sold as single blades or sets
Steel
Tool steel, heat-treated for edge life on sheet steel
Made
To your drawing, to a sample, or from your machine model
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

What a notcher does

A notching machine cuts a corner or a V out of a sheet in one stroke. This lets the sheet be folded into a box, tray, duct or cabinet without overlapping corners. The machine has upper blades that move down and lower blades on the table. They cut like a small shear, so the blade gap and sharpness matter in the same way.

Fixed or variable angle

  • Fixed-angle notchers

    Usually cut a 90° corner. The blades are simpler and very common.

  • Variable-angle notchers

    The blades swing to cut angles, often between about 30° and 140°. The blade shape and the pivot holes must match the machine exactly.

  • Fixed-angle notchers

    Usually cut a 90° corner. The blades are simpler and very common.

  • Variable-angle notchers

    The blades swing to cut angles, often between about 30° and 140°. The blade shape and the pivot holes must match the machine exactly.

Signs of worn blades

  • A burr along the notch edge

  • The corner of the notch is not clean, so the box corner does not close well

  • The sheet bends at the corner before it is cut

  • More force or noise during the cut

  • A burr along the notch edge

  • The corner of the notch is not clean, so the box corner does not close well

  • The sheet bends at the corner before it is cut

  • More force or noise during the cut

Check the gap first. If the problem stays, regrind or replace the blades.

Regrinding tips

Regrind the upper and lower blades together, and keep the original edge angle. After regrinding, reset the blade gap for the sheet thickness. Keep a spare set, so the machine works while the other set is at the grinder.

Send these details for your bulk quotation

  • Machine make and model, and fixed or variable angle

  • Blade sizes (mm) and the hole pattern, or a drawing

  • Upper blades, lower blades, or full sets

  • The material and the thickest sheet you notch

  • Quantity band, and one-off or repeat order

  • Machine make and model, and fixed or variable angle

  • Blade sizes (mm) and the hole pattern, or a drawing

  • Upper blades, lower blades, or full sets

  • The material and the thickest sheet you notch

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of the blade you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the machine, the tool sizes or drawing, and your quantity band.

  2. Our team checks

    the blade shape, holes and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the machine, the tool sizes or drawing, and your quantity band.

  2. Our team checks

    the blade shape, holes and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawings on file, so every batch fits the same holders.

Who uses notching blades

  • Sheet-metal fabrication shops

  • Duct, HVAC and enclosure makers

  • Panel, cabinet and tray makers

  • Notching machine dealers and distributors

  • Sheet-metal fabrication shops

  • Duct, HVAC and enclosure makers

  • Panel, cabinet and tray makers

  • Notching machine dealers and distributors

Do you make blades for variable-angle notchers?

Yes, to the drawing or to a sample. The blade shape and pivot holes must match your machine exactly, so send the model and sizes.

Can I order only the upper blades?

Yes. You can order single blades or full sets.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, shape, steel and quantity band. You receive a written quotation before you order.

Section
Press Brake and Punching Tools
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote