On this page7
  1. Why buy the punch and die as a set
  2. Clearance in practice
  3. Reading the slug
  4. Wear and replacement
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Who uses hole punch and die sets

Hole punch and die sets, matched to your material. TFI Co. has made steel tools since 1965. We make the punch, the die, or the complete set, for fabricators, press shops and distributors who order 50 to 5,000+ pcs.

Supply
Hole punches, hole dies, or matched sets
Shapes
Round, oblong, square and special shapes to drawing
Clearance
Set for your material and thickness
Steel
Tool steel; carbide tips for long runs
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Supply
Hole punches, hole dies, or matched sets
Shapes
Round, oblong, square and special shapes to drawing
Clearance
Set for your material and thickness
Steel
Tool steel; carbide tips for long runs
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Why buy the punch and die as a set

A hole is cut between the punch edge and the die edge. The quality of the hole depends on the clearance between them. A punch and die made as one set have the clearance built in for your material. Mixing a new punch with an old, worn die often gives a big burr and short punch life.

Clearance in practice

The gap between punch and die is called the clearance. It is set as a share of the sheet thickness, and it is larger for thicker and harder material. Too little clearance makes the punch work harder and wear fast. Too much gives a large burr and a rough hole. Tell us the material and thickness, and we match the clearance.

  • Mild steel

    Standard clearance gives a clean hole with a small burr.

  • Stainless steel

    Needs more clearance than mild steel and good lubrication.

  • Aluminium

    Needs less clearance; watch for material sticking to the punch.

  • Mild steel

    Standard clearance gives a clean hole with a small burr.

  • Stainless steel

    Needs more clearance than mild steel and good lubrication.

  • Aluminium

    Needs less clearance; watch for material sticking to the punch.

Reading the slug

The slug (the round piece punched out) shows if the clearance is right. A clean, even shiny band with a smooth break below it is good. A rough, torn slug or a very small shiny band means the clearance is too big. A double shiny band means it is too small.

Wear and replacement

The punch usually wears faster than the die. Check both edges when you regrind. When the die is worn, the clearance grows, and the burr returns even with a sharp punch. That is the time to replace the die, or the whole set.

Send these details for your bulk quotation

  • Hole shape and size

  • Material and thickness

  • Press type and holder size, or a present tool

  • Punch, die, or complete set

  • Quantity band, and one-off or repeat order

  • Hole shape and size

  • Material and thickness

  • Press type and holder size, or a present tool

  • Punch, die, or complete set

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of the punch and die you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the machine, the tool sizes or drawing, and your quantity band.

  2. Our team checks

    the shape, size, clearance and holder fit, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the machine, the tool sizes or drawing, and your quantity band.

  2. Our team checks

    the shape, size, clearance and holder fit, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawings on file, so every batch fits the same holders.

Who uses hole punch and die sets

  • Press shops and stamping plants
  • Sheet-metal fabricators
  • Steel structure and profile makers
  • Tool dealers and distributors
  • Press shops and stamping plants
  • Sheet-metal fabricators
  • Steel structure and profile makers
  • Tool dealers and distributors

Can I order only dies?

Yes. Send the die size and the punch size it works with, so we keep the clearance right.

Which clearance do you use?

We set it for the material and thickness you send. If you have a clearance you prefer, give it in the form.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, shape, steel and quantity band. You receive a written quotation before you order.

Section
Press Brake and Punching Tools
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote