On this page7
Round punches and dies for punching presses, made to your drawing. TFI Co. has made steel tools since 1965. We supply fabricators, panel makers, tool dealers and distributors who order 50 to 5,000+ pcs.
- Tools
- Round punches and their matching dies
- For
- Turret punch presses, punching presses and stamping presses
- Steel
- Tool steel; carbide-tipped punches for long runs
- Made
- To your drawing, to a sample, or to your holder or station size
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- Tools
- Round punches and their matching dies
- For
- Turret punch presses, punching presses and stamping presses
- Steel
- Tool steel; carbide-tipped punches for long runs
- Made
- To your drawing, to a sample, or to your holder or station size
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
Hole size and sheet thickness
As a rule, a round hole should be at least as wide as the sheet is thick. A smaller hole puts too much load on a thin punch, and the punch can break. For stainless and high-strength steel, the limit is stricter. If your hole is close to this limit, tell us, and we check the punch design.
Punch and die clearance
The gap between punch and die is called the clearance. It is set as a share of the sheet thickness, and it is larger for thicker and harder material. Too little clearance makes the punch work harder and wear fast. Too much gives a large burr and a rough hole. Tell us the material and thickness, and we match the clearance.
Holders and stations
On a turret press, each tool sits in a station of a set size. The punch must fit the holder, the guide and the stripper of that station, and its working length must match your other tools. Send the station size and the turret style, or a photo of a present punch with its sizes.
Keep punches sharp
Regrind early
Small, frequent regrinds keep punch life longer than waiting for a big burr.
Check the length
Each regrind shortens the punch. Record the length and use shims if your system allows.
Lubricate
Punching stainless and aluminium without lubrication makes the material stick to the punch (galling).
Regrind early
Small, frequent regrinds keep punch life longer than waiting for a big burr.
Check the length
Each regrind shortens the punch. Record the length and use shims if your system allows.
Lubricate
Punching stainless and aluminium without lubrication makes the material stick to the punch (galling).
Send these details for your bulk quotation
Hole diameter, and the punch length
Die size and clearance, or the sheet material and thickness
Press type, turret style and station size
Number of hits per batch or per year
Quantity band, and one-off or repeat order
Hole diameter, and the punch length
Die size and clearance, or the sheet material and thickness
Press type, turret style and station size
Number of hits per batch or per year
Quantity band, and one-off or repeat order
No drawing? A phone photo of the punch you use now, with a ruler beside it, is enough to start.
How a bulk order works
You send
the machine, the tool sizes or drawing, and your quantity band.
Our team checks
the diameter, length, holder fit and clearance, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the machine, the tool sizes or drawing, and your quantity band.
Our team checks
the diameter, length, holder fit and clearance, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawings on file, so every batch fits the same holders.
Who uses round punches
Sheet-metal fabricators with turret presses
Electrical panel and enclosure makers
HVAC, ventilation and perforated sheet makers
Tool dealers and distributors
Sheet-metal fabricators with turret presses
Electrical panel and enclosure makers
HVAC, ventilation and perforated sheet makers
Tool dealers and distributors
Do you make the die as well?
Yes. Order punch and die together so the clearance matches your sheet.
When should I choose a carbide-tipped punch?
For long runs and abrasive or hard materials. See our carbide-tipped punches page.
What is the smallest order?
These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the size, shape, steel and quantity band. You receive a written quotation before you order.
- Section
- Press Brake and Punching Tools
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote