On this page8
Round punches and dies for ironworkers and profile punching machines. TFI Co. has made steel tools since 1965. We supply steel structure makers, fabrication shops, machine dealers and distributors who order 50 to 5,000+ pcs.
- Tools
- Round, oblong and square punches, and their dies
- For
- Ironworkers and profile punching machines
- Work
- Holes in angle, flat bar, channel and plate
- Steel
- Tough tool steel for thick material and shock
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- Tools
- Round, oblong and square punches, and their dies
- For
- Ironworkers and profile punching machines
- Work
- Holes in angle, flat bar, channel and plate
- Steel
- Tough tool steel for thick material and shock
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
Why ironworker punches are different
An ironworker punches thick material: plate, angle and flat bar for steel structures, towers and frames. Each hit is a heavy shock. The punch must be tough so it does not crack, and hard enough to keep its edge. The die must be strong and have the right clearance for the thickness.
Hole size and thickness
As a rule, the hole should be at least as wide as the material is thick. For example, 12 mm plate needs at least a 12 mm hole. Smaller holes in thick plate overload the punch. Check also the maximum force of your ironworker for the hole size and thickness you need.
Punch shapes
Round
For bolt holes; the most common.
Oblong (slotted)
For adjustable bolt positions in frames and brackets.
Square
For carriage bolts and special fittings.
Round
For bolt holes; the most common.
Oblong (slotted)
For adjustable bolt positions in frames and brackets.
Square
For carriage bolts and special fittings.
Holder fit
Ironworker punches fit into a punch holder or coupling nut, and dies sit in a die holder. These differ between machine makers and models. Send the model, or the sizes of the shank, head and die body of a present tool.
Clearance
The gap between punch and die is called the clearance. It is set as a share of the sheet thickness, and it is larger for thicker and harder material. Too little clearance makes the punch work harder and wear fast. Too much gives a large burr and a rough hole. Tell us the material and thickness, and we match the clearance.
Send these details for your bulk quotation
Ironworker make and model, and the punch and die holder type
Hole shape and size
Material and thickness (angle, flat bar, channel or plate)
Number of holes per day or per month
Quantity band, and one-off or repeat order
Ironworker make and model, and the punch and die holder type
Hole shape and size
Material and thickness (angle, flat bar, channel or plate)
Number of holes per day or per month
Quantity band, and one-off or repeat order
No drawing? A phone photo of the punch and die you use now, with a ruler beside it, is enough to start.
How a bulk order works
You send
the machine, the tool sizes or drawing, and your quantity band.
Our team checks
the shape, size, holder fit and clearance, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the machine, the tool sizes or drawing, and your quantity band.
Our team checks
the shape, size, holder fit and clearance, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawings on file, so every batch fits the same holders.
Who uses ironworker punches
- Steel structure, tower and mast makers
- Fabrication shops and welding workshops
- Agricultural and trailer makers
- Ironworker dealers and tool distributors
- Steel structure, tower and mast makers
- Fabrication shops and welding workshops
- Agricultural and trailer makers
- Ironworker dealers and tool distributors
Can you make oblong punches?
Yes. Send the slot length and width, and the material thickness.
Do you make the matching die?
Yes. Order punch and die together so the clearance matches your material.
What is the smallest order?
These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the size, shape, steel and quantity band. You receive a written quotation before you order.
- Section
- Press Brake and Punching Tools
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote