On this page8
  1. Why die marks happen
  2. How the film works
  3. How to use it
  4. Film or special tools?
  5. Why buy in bulk
  6. Send these details for your bulk quotation
  7. How a bulk order works
  8. Who uses anti-mark film

Anti-mark film for press brake dies: bend without die marks. TFI Co. has made press brake tools and accessories since 1965. Our protective film goes between the die and the sheet, so stainless steel, aluminium and coated sheet keep a clean surface. We supply fabricators, tool dealers and distributors who order 50 to 5,000+ pcs.

What it is
A tough protective film laid over the die V-opening
Stops
Die lines and scratches on the outside of the bend
For
Stainless steel, aluminium, pre-painted and coated sheet
Supplied
In rolls; tell us the width and length you need
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
What it is
A tough protective film laid over the die V-opening
Stops
Die lines and scratches on the outside of the bend
For
Stainless steel, aluminium, pre-painted and coated sheet
Supplied
In rolls; tell us the width and length you need
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Why die marks happen

When the punch presses the sheet into the V-die, the sheet slides over the two die shoulders. On soft or polished surfaces this leaves two lines along the bend. On stainless kitchen equipment, lift panels or architectural parts, these marks mean extra polishing or rejected parts.

How the film works

The film lies across the die. The sheet slides on the film, not on the steel shoulders. The film takes the pressure and the friction, so the sheet surface stays clean. You change the film when it is worn through.

How to use it

  • Cut to length

    Cut a piece a little longer than the bend.

  • Lay it flat

    Place it over the V-opening, without folds.

  • Bend as normal

    Check the angle on the first part, because the film adds a little thickness.

  • Replace when worn

    Check the film after a number of bends; a hole means it is time to change it.

  • Cut to length

    Cut a piece a little longer than the bend.

  • Lay it flat

    Place it over the V-opening, without folds.

  • Bend as normal

    Check the angle on the first part, because the film adds a little thickness.

  • Replace when worn

    Check the film after a number of bends; a hole means it is time to change it.

Film or special tools?

For mark-free bending you can also use dies with rollers or special inserts. Film is the simplest way: it works with the dies you already have and costs little per bend. For long series, many shops use film on standard dies and keep special tools for the hardest jobs.

Why buy in bulk

Film is used up every day in shops that bend stainless or coated sheet. Dealers and distributors keep it in stock for their customers. A quantity band gives one price for a steady supply.

Send these details for your bulk quotation

  • Film width and roll length you need

  • Die V-openings you use most

  • Sheet material and thickness

  • Number of rolls per month

  • Quantity band, and one-off or repeat order

  • Film width and roll length you need

  • Die V-openings you use most

  • Sheet material and thickness

  • Number of rolls per month

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of your die and the film you use now, with a ruler beside it, is enough to start.

How a bulk order works

  1. You send

    the machine, clamping style and tool profiles, and your quantity band.

  2. Our team checks

    the width, length and the sheet you bend, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the machine, clamping style and tool profiles, and your quantity band.

  2. Our team checks

    the width, length and the sheet you bend, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawings on file, so every new tool matches the tools you already have.

Who uses anti-mark film

  • Kitchen and catering equipment makers

  • Lift, elevator and architectural panel makers

  • Enclosure and cabinet makers using pre-painted sheet

  • Press brake tool dealers and distributors

  • Kitchen and catering equipment makers

  • Lift, elevator and architectural panel makers

  • Enclosure and cabinet makers using pre-painted sheet

  • Press brake tool dealers and distributors

Does the film change the bend angle?

A little, because it adds thickness. Check the angle on the first part and correct it on the controller.

Which width do I need?

The film must cover the V-opening and both die shoulders. Tell us the V-openings you use and we advise the width.

What is the smallest order?

These pages are for bulk orders from 50 pcs (tools or segments). If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the film width, the roll length and the quantity band. You receive a written quotation before you order.

Section
Press Brake and Punching Tools
Updated
19 November 2026
Reading time
3 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote