On this page8
Top and bottom slitter knives for metal, in matched sets. TFI Co. has made steel blades since 1965. We make slitter knife sets for metal coil lines, for service centres and distributors who order 50 to 5,000+ pcs.
- What you get
- Top and bottom knives made as one matched batch
- Why
- Same thickness and same steel in every knife of the set
- Made
- To your drawing, sample or line model
- Order
- Complete sets, or single replacement knives
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
- What you get
- Top and bottom knives made as one matched batch
- Why
- Same thickness and same steel in every knife of the set
- Made
- To your drawing, sample or line model
- Order
- Complete sets, or single replacement knives
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- On request, per quantity band
Why slitter knives work in pairs
On a metal slitting line, each cut is made by a top knife and a bottom knife. Between the knives sit spacers, which set the strip widths and the clearance between top and bottom knives. Because the whole set works together, one knife that is thicker or thinner than the others changes every strip width after it.
Plan your set
Arbour diameter
this sets the bore of every knife.
Number of knives per arbour
top and bottom; this sets the batch size.
Thickness tolerance
the tighter it is, the more exact your strip widths.
Spares
keep one spare set, so one set can be reground while the other runs.
Arbour diameter
this sets the bore of every knife.
Number of knives per arbour
top and bottom; this sets the batch size.
Thickness tolerance
the tighter it is, the more exact your strip widths.
Spares
keep one spare set, so one set can be reground while the other runs.
Why order the set in one batch
Knives made in one batch come from the same steel and the same heat treatment. They wear at the same rate, and you can regrind them together. Mixing old and new knives, or knives from different makers, often gives uneven strip widths and different burr on each strip. This is a good reason to order complete sets in a quantity band, and to repeat the same drawing next time.
Regrinding sets
Regrind all knives of a set together, to the same thickness. Record the new size, and adjust the spacers if needed. When the knives reach the smallest diameter your line allows, replace the set.
Related example
TFI Co. makes metal slitter knives such as ø400 × ø260 × 15 mm in heat-treated tool steel. See our metal slitter knives page for more on burr and clearance.
Send these details for your bulk quotation
Top and bottom knife sizes: outside diameter × bore × thickness (mm)
Arbour diameter, and the keyway
Number of knives in one set
Coil material and thickness range
Quantity band: number of sets or knives, one-off or repeat
Top and bottom knife sizes: outside diameter × bore × thickness (mm)
Arbour diameter, and the keyway
Number of knives in one set
Coil material and thickness range
Quantity band: number of sets or knives, one-off or repeat
No drawing? A phone photo of the knife you use now, with a ruler across the diameter and the bore, is enough to start.
How a bulk order works
You send
the sizes, drawing or machine model, and your quantity band.
Our team checks
the sizes, thickness tolerance, keyway and steel, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
You send
the sizes, drawing or machine model, and your quantity band.
Our team checks
the sizes, thickness tolerance, keyway and steel, and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
the drawing and the quotation, and production starts.
For repeat orders, we keep your drawing on file, so the next batch is the same knife. We can also plan batches to match your yearly use.
Where these sets are used
Steel and aluminium coil slitting lines
Steel service centres
Strip mills
Slitting line builders and spare-parts distributors
Steel and aluminium coil slitting lines
Steel service centres
Strip mills
Slitting line builders and spare-parts distributors
Can I order single knives to complete a set?
Yes, but for the best result the new knife must match the thickness of the knives already in the set. Send the present thickness.
Do you make the spacers?
Send the spacer drawing with your enquiry and our team will tell you what is possible.
What is the smallest order?
These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the size, the steel and the quantity band. You receive a written quotation before you order.
- Section
- Slitter and Circular Knives
- Updated
- 19 November 2026
- Reading time
- 3 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote