On this page7
  1. Which circular blade do you need?
  2. Sizes that decide the fit
  3. Examples TFI Co. has made
  4. Why the steel and heat treatment matter
  5. Send these details for your bulk quotation
  6. How a bulk order works
  7. Where circular blades are used

Circular blades for slitting, trimming and cutting lines, made to your drawing. TFI Co. has made steel blades since 1965, including circular knives for converting, packaging, corrugated and metal lines. We supply factories, machine dealers and distributors who order 50 to 5,000+ pcs.

Types
Dished, flat (single or double bevel), toothed, serrated and cut-off knives
Pairs
Top knives and their counter blades or bottom knives
Made
To your drawing, to a sample, or from your machine model
Sizes
From small dish knives (Ø62 mm) to metal slitter knives (Ø400 mm)
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band
Types
Dished, flat (single or double bevel), toothed, serrated and cut-off knives
Pairs
Top knives and their counter blades or bottom knives
Made
To your drawing, to a sample, or from your machine model
Sizes
From small dish knives (Ø62 mm) to metal slitter knives (Ø400 mm)
Quantity bands
50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
Price
On request, per quantity band

Which circular blade do you need?

  • Dished (concave) knives

    cut against a counter blade or bottom roller. They are common on paper, film and packaging slitters.

  • Flat knives with a bevel

    work in top and bottom pairs, for example on metal coil slitting lines.

  • Toothed and serrated knives

    cut film, bags and wraps, and make tear lines.

  • Cut-off knives

    cut a moving web or tube across its width.

  • Dished (concave) knives

    cut against a counter blade or bottom roller. They are common on paper, film and packaging slitters.

  • Flat knives with a bevel

    work in top and bottom pairs, for example on metal coil slitting lines.

  • Toothed and serrated knives

    cut film, bags and wraps, and make tear lines.

  • Cut-off knives

    cut a moving web or tube across its width.

Not sure? Send a photo of the knife and of where it sits on the machine. We tell you the type.

Sizes that decide the fit

Every circular blade is defined by four numbers: outside diameter, bore (the hole in the middle), thickness and bevel angle. Some also have a keyway, pin holes or a bolt circle. If one of these is wrong, the blade does not fit or does not cut cleanly, so we check them on every drawing.

Examples TFI Co. has made

Dish slitter knives with a 60° bevel, in these sizes:

  • 62 × 40 × 0.64 mm

    Bevel
    60°
    Typical job
    Thin, light materials on fast lines
  • 65 × 40 × 1 mm

    Bevel
    60°
    Typical job
    Compact, high-speed slitting
  • 105 × 65 × 1.2 mm

    Bevel
    60°
    Typical job
    General converting
  • 130 × 80 × 1.5 mm

    Bevel
    60°
    Typical job
    Paper, board and film
  • 130 × 100 × 1.5 mm

    Bevel
    60°
    Typical job
    Paper, board and film
  • 140 × 70 × 3 mm

    Bevel
    60°
    Typical job
    Heavy-duty, long runs
  • 62 × 40 × 0.64 mm

    Bevel
    60°
    Typical job
    Thin, light materials on fast lines
  • 65 × 40 × 1 mm

    Bevel
    60°
    Typical job
    Compact, high-speed slitting
  • 105 × 65 × 1.2 mm

    Bevel
    60°
    Typical job
    General converting
  • 130 × 80 × 1.5 mm

    Bevel
    60°
    Typical job
    Paper, board and film
  • 130 × 100 × 1.5 mm

    Bevel
    60°
    Typical job
    Paper, board and film
  • 140 × 70 × 3 mm

    Bevel
    60°
    Typical job
    Heavy-duty, long runs

And for metal: coil slitter knives of ø400 × ø260 × 15 mm. Your size does not need to be on this list. We make to drawing.

Why the steel and heat treatment matter

A circular knife turns many thousands of times per shift. The edge must stay sharp, and the body must stay flat and round. The steel grade and the heat treatment are chosen for the material you cut: paper and board wear the edge slowly but steadily; metal coil loads the edge hard; film needs a very clean edge. Tell us your material and we choose the steel for it.

Send these details for your bulk quotation

  • Outside diameter × bore × thickness (mm), and the bevel angle

  • Keyway, pin holes or bolt circle

  • Type: dished, flat, toothed, serrated or cut-off

  • The material you cut, and the machine make and model

  • Quantity band, and one-off or repeat order

  • Outside diameter × bore × thickness (mm), and the bevel angle

  • Keyway, pin holes or bolt circle

  • Type: dished, flat, toothed, serrated or cut-off

  • The material you cut, and the machine make and model

  • Quantity band, and one-off or repeat order

No drawing? A phone photo of the knife you use now, with a ruler across the diameter and the bore, is enough to start.

How a bulk order works

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the diameter, bore, thickness, bevel and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

  1. You send

    the sizes, drawing or machine model, and your quantity band.

  2. Our team checks

    the diameter, bore, thickness, bevel and steel, and asks if anything is missing.

  3. You receive a written quotation

    for your quantity band.

  4. You approve

    the drawing and the quotation, and production starts.

For repeat orders, we keep your drawing on file, so the next batch is the same knife. We can also plan batches to match your yearly use.

Where circular blades are used

  • Paper, film and foil converting

  • Packaging and bag making

  • Corrugated board and carton lines

  • Metal coil slitting

  • Tissue and towel lines

  • Distributors who stock knives for these machines

  • Paper, film and foil converting

  • Packaging and bag making

  • Corrugated board and carton lines

  • Metal coil slitting

  • Tissue and towel lines

  • Distributors who stock knives for these machines

Do you make the counter blade too?

Yes. TFI Co. makes both the dish knife and its counter blade. Send the sizes of both.

Can you copy a knife from a sample?

Yes. Send the sample or its sizes and a photo, and we make a drawing for you to approve.

What is the smallest order?

These pages are for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.

How is the price set?

The price depends on the size, the steel and the quantity band. You receive a written quotation before you order.

Section
Slitter and Circular Knives
Updated
19 November 2026
Reading time
4 min read

Ready to order in volume?

Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.

Request a volume quote