On this page4
HSS M2 circular saw blade for aluminium, 10″ × 1/16″ × 5/8″ (254 × 1.6 × 15.9 mm), for bulk orders. For saws that take a 10-inch blade on a 5/8-inch arbor. TFI Co. has made steel blades since 1965. We supply factories, tool shops and distributors who order 50 to 5,000+ pcs.
- Diameter
- 10″ (254 mm)
- Thickness
- 1/16″ (1.6 mm)
- Bore
- 5/8″ (15.9 mm)
- Steel
- HSS M2 (DMo5)
- For
- Aluminium and other soft non-ferrous metal
- Teeth
- Count and shape to your profile
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- Written quotation per quantity band
- Diameter
- 10″ (254 mm)
- Thickness
- 1/16″ (1.6 mm)
- Bore
- 5/8″ (15.9 mm)
- Steel
- HSS M2 (DMo5)
- For
- Aluminium and other soft non-ferrous metal
- Teeth
- Count and shape to your profile
- Quantity bands
- 50–199 · 200–999 · 1,000–5,000 · 5,000+ pcs
- Price
- Written quotation per quantity band
About this blade
HSS M2 (DMo5, 1.3343) is a tough high-speed steel. For aluminium, the teeth need room for the chips, and a tooth shape that does not grab the soft metal.
A thin 1/16″ blade cuts a very narrow kerf, for thin profiles and light work.
Cutting tips for aluminium
Lubricate
Use a lubricant or mist, so the aluminium chips do not stick to the teeth.
Teeth in the cut
Keep at least two or three teeth in the wall of the profile.
Clamp firmly
Thin profiles vibrate; clamp them close to the blade.
Clean the teeth
Remove stuck aluminium before it tears the cut face.
Lubricate
Use a lubricant or mist, so the aluminium chips do not stick to the teeth.
Teeth in the cut
Keep at least two or three teeth in the wall of the profile.
Clamp firmly
Thin profiles vibrate; clamp them close to the blade.
Clean the teeth
Remove stuck aluminium before it tears the cut face.
Send these details for your bulk quotation
Teeth
Number of teeth or the pitch, and the tooth shape
Material
Alloy, and profile or bar size
Machine
Saw make and model
Quantity
Your band, and one-off or repeat order
Teeth
Number of teeth or the pitch, and the tooth shape
Material
Alloy, and profile or bar size
Machine
Saw make and model
Quantity
Your band, and one-off or repeat order
No drawing? A phone photo of the blade you use now, with a ruler beside it, is enough to start.
How a bulk order works
You send
the size, teeth, pin holes and your quantity band.
Our team checks
the details and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
it, and production starts.
You send
the size, teeth, pin holes and your quantity band.
Our team checks
the details and asks if anything is missing.
You receive a written quotation
for your quantity band.
You approve
it, and production starts.
For repeat orders, we keep your specification on file, so every batch is the same.
Can I use a steel-cutting blade on aluminium?
It is not a good idea. The chips stick, the cut is rough and the blade wears fast. Use a blade made for non-ferrous metal.
What is the smallest order?
This page is for bulk orders from 50 pcs. If you need fewer, say so in the form and our team will tell you what is possible.
How is the price set?
The price depends on the size, the steel, the teeth, any coating and the quantity band. You receive a written quotation before you order.
- Section
- Cold Saw Blades
- Updated
- 19 November 2026
- Reading time
- 2 min read
Ready to order in volume?
Orders from 50 to 5,000+ pieces. Send your size or drawing and the quantity, and our team replies with a quotation.
Request a volume quote